SEAPOWER

Power of the Sea

SEAPOWER Electrical Systems designs and builds marine-grade power electronics for commercial vessels, superyachts, shipyards, ports and naval defence. From a 10,000 m² R&D and production centre in the Altınova shipyard zone in Yalova, and an engineering office in Tuzla, Istanbul, the company supplies turnkey frequency conversion, shore power and energy storage. The systems help fleets and ports keep pace with EEXI, CII, IMO and EU ETS requirements.

SEAPOWER MT SPC shore power converter, 10–1000 kVA
SEAPOWER MT SFC frequency converter, 100 kVA–50 MVA

Why SEAPOWER

High-performance power, tailored to the installation, from low voltage through medium voltage. Equipment is developed and built in-house for continuous marine service, with a BV Mode II approved factory and a range prepared for class.

30+
Years in power electronics
300,000 kVA
Installed in ports and fleets
10,000 m²
R&D and production in Yalova

Marine-grade conversion

Frequency converters run from 100 kVA to 50 MVA, including 3,300 V medium-voltage units. Shore power converters cover 10 to 1,000 kVA. Modular IGBT designs bring galvanic isolation, parallel operation and a multilingual touch interface.

Cleaner power, at sea and alongside

Shore connection lets a berthed ship shut down its auxiliary generators and cut emissions, noise and vibration in port. A shaft converter holds stable voltage and frequency while the main engine changes speed, so the shaft generator can stay online from pier to pier.

Turnkey, from R&D to commissioning

Research, manufacture and test stay in one plant, with an in-house capacity of about 200,000 kVA a year. Mobile IP65 stations in 20 ft and 40 ft containers give a port a shore supply that can be placed where the berth needs it.

Certified production

The quality system covers ISO 9001, ISO 14001, ISO 27001 and ISO 45001. Factories in Altınova are BV Mode II approved, and the marine range is built for class, including BV, DNV, ABS and LR.

Naval and commercial service

SEAPOWER supplies naval programmes and NATO shore infrastructure, and works with superyacht builders and European ferry and offshore operators. Retrofits are planned for short downtime, so an existing switchboard can take a shaft converter or a shore connection without a long stop.

ISO 9001:2015
ISO 14001:2015
ISO 27001:2022
ISO 45001:2018
BV Mode II
IEC 80005

Marine product range

One electrical range covers conversion, protection, storage and distribution. The same building blocks serve a yacht marina, a shipyard berth, a shaft generator and a naval switchboard.

Series Rating Typical use
MT SPC shore power 10–1,000 kVA Superyachts and marina berths
MT SFC frequency converter 100 kVA–50 MVA, up to 3,300 V 50/60 Hz conversion, low and medium voltage
Shaft converter Custom, for example 1,600 kVA Variable-speed shaft generators
MT UPS 1–1,000 kVA Critical marine and defence loads
Rectifier and charger Up to 5,000 A DC; chargers 10–2,000 A Battery charging and DC supply
Transformer Up to 1,200 kVA Galvanic isolation
SESS energy storage 100 kVA–4 MVA, up to 1.16 MWh Peak shaving and microgrid backup
Mobile containers 20 ft and 40 ft, IP65 Outdoor plug-and-play shore stations

Systems for ships, yards and ports

Superyachts alongside in a marina

Shore power for yachts

The SPC series accepts a wide shore voltage and frequency and delivers a stable onboard supply, so a yacht can connect in harbours with different grids. Galvanic isolation, coated boards and a marine filter set protect the installation. Builders using the range include Benetti, Heesen, Ferretti Group, Azimut and Tankoa.

Shaft converters

A shaft generator follows engine speed, while the ship grid needs constant frequency. The converter sits between the shaft generator and the main switchboard, so the set can run across a wide RPM band on both fixed-pitch and controllable-pitch propellers. In combinator mode, SEAPOWER states a fuel-consumption reduction of about 7–10%, with less use of the auxiliary generators and a better EEXI and CII result.

Green ports and cold ironing

Alternative marine power supplies the ship from shore so auxiliary diesels can stop. Systems are engineered to IEC 80005-1 for high voltage and IEC 80005-3 for low voltage, including 6.6 kV and 11 kV connections, with a controlled transfer onto the ship switchboard. The same approach scales from a yard berth to a port microgrid.

Container ship at sea Container terminal and berthed ships

Selected references

Installations named by SEAPOWER span yacht newbuilds, ferry and offshore fleets, Turkish shipyards and naval bases.

Malta Freeport 17.5 MVA shore power supply
Port of Termoli, Italy 1,500 kVA shipyard shore connection
Uzunada NATO naval base 1.5 MVA shore system
Ulusoy Marine converters, 1,500 kVA × 2
Qatar Navy MT UPS and rectifiers, including AL DOHA and AL SHAMAL
Superyacht newbuilds Shore converters for Leona (300 kVA), Tatiana (200 kVA), Allreem (300 kVA) and others
Fleets DFDS, Ulusoy Sealines, Caledonian MacBrayne, Havila Kystruten, Acta Marine
Shipyards Sefine, Özata, Beşiktaş, Tersan, Sedef, Orskov Yard
Turkish Navy Foça, Ereğli, Aksaz and L400 Anadolu